top of page

Here is a step-by-step guide to set up and use VNC Viewer with a Sharp MX copier:

To control a Sharp MX copier with VNC Viewer, you can use a network-based remote control setup. This allows you to interact with the copier's interface remotely, which can be useful for managing settings, troubleshooting, or accessing copier functions from a different location.

Here is a step-by-step guide to set up and use VNC Viewer with a Sharp MX copier:

1. Ensure Network Connectivity:

- Ensure the copier is connected to the same network as the device you'll use with VNC Viewer.

- Confirm that the copier has a valid IP address and can communicate over the network.

2. Enable Remote Access on the Copier:

- On the copier's control panel, go to "Settings" or "System Settings."

- Find the "Network" or "Remote Access" section.

- Look for an option to enable VNC or remote desktop access.

- If required, set up a password for security.

3. Install VNC Viewer on Your Device:

- Download and install VNC Viewer on your computer, tablet, or smartphone.

- Open the application and prepare to add a new remote connection.

4. Configure VNC Viewer:

- In VNC Viewer, add a new connection with the copier's IP address.

- If you set up a password on the copier, enter it when prompted.

- Configure any additional settings as needed, such as screen resolution or scaling options.

5. Connect to the Copier:

- After setting up the connection in VNC Viewer, click "Connect" or "Start."

- If successful, you should see the copier's interface on your device.

- You can now control the copier remotely, adjusting settings, checking job status, or performing other tasks.

6. Troubleshoot Connection Issues:

- If you can't connect, double-check the IP address and network connectivity.

- Ensure firewall or security settings allow VNC connections.

- Restart the copier and VNC Viewer to reset any network-related issues.

Controlling your Sharp MX copier with VNC Viewer offers flexibility and remote access, enabling you to manage the copier from various devices. If you encounter any persistent issues, consult your network administrator or technical support for further assistance.


Recent Posts

See All

Sharp Error Codes List

Code Description Comment AO-01 PCU PWB ROM error Simulation Code - 16 AO-02 SCU PWB ROM error Simulation Code - 16 AO-10 Color profile error Simulation Code - 16 AO-11 Firmware version inconsistency (


bottom of page