Sharp MX Copiers - Set Custom Paper Size

Certainly! Setting a custom paper size on a Sharp MX-3070 copier can be useful for various specialized printing tasks. Here's a step-by-step guide to help you set a custom paper size:

### Preparing the Copier

1. **Turn On the Copier**: Make sure the Sharp MX-3070 is turned on and is in a ready state.

2. **Load Paper**: Place the custom-sized paper in the paper tray you wish to use.

### Accessing the Settings

3. **Go to the Home Screen**: If not already there, press the 'Home' button on the control panel.

4. **Access System Settings**: Tap on the 'System Settings' icon on the touchscreen.

### Navigating to Paper Size Settings

5. **Select 'Common Settings'**: In the System Settings menu, tap on 'Common Settings'.

6. **Choose 'Paper Type Management'**: Scroll down and select this option.

7. **Tap on 'Paper Size Settings'**: This will allow you to configure custom paper sizes.

### Setting Custom Paper Size

8. **Select the Paper Tray**: Choose the paper tray where you've loaded your custom-sized paper.

9. **Choose 'Custom'**: In the paper size options, scroll down and select 'Custom'.

10. **Enter Dimensions**: Input the width and height of your custom paper size. Make sure to confirm the units (mm or inches).

11. **Save Settings**: Tap 'OK' or 'Save' to save the custom paper size settings.

### Confirming and Testing

12. **Confirm Settings**: A summary screen may appear. Confirm that the settings are correct.

13. **Test Print**: It's a good idea to perform a test print to ensure that the custom paper size has been set correctly.

### Final Steps

14. **Exit**: Tap 'Exit' or 'Home' to return to the main screen.

15. **Ready to Use**: Your Sharp MX-3070 should now be set to use the custom paper size for future print jobs.

Please note that the exact steps may vary slightly depending on the firmware version of your Sharp MX-3070. Always refer to the user manual for the most accurate information.

Would you like to know anything else?