top of page

"Network Scanner Tool Lite"

Here is an instruction list for installing and setting up the "Network Scanner Tool Lite" based on the information from the Copier Rental website:

Installation Guide for Network Scanner Tool Lite (Standard Installation)

Step 1: Select the Software to Install

  1. Visit the "Software Downloads" page.

Step 2: Download the Software and Save the File

  1. Click the "Download" button located at the bottom of the page.

  2. In the window that appears, click "Save."

Step 3: Execute the Installer

  1. Locate the downloaded file.

  2. Right-click on the file and select "Run as administrator."

  3. If prompted, enter the administrator password.

Step 4: User Account Control Window

  1. When the User Account Control window appears, click "Yes" to allow the app to make changes to your device.

Step 5: Language Selection Window

  1. Choose a display language for the installation.

  2. Click the "OK" button.

Step 6: InstallShield Wizard Screen

  1. On the "Welcome to the InstallShield Wizard for Network Scanner Tool Lite" screen, select "Typical."

  2. Click the "Next" button.

Step 7: Windows Firewall Unblock Utility

  1. The "Windows Firewall Unblock Utility" screen will appear (only for the first-time installation).

  2. Click the "Allow access" button.

Step 8: Scanner Selection Screen

  1. The Scanner Selection screen will display a list of detected network scanners.

  2. Select the network scanner you want to use.

  3. Click the "Next" button.

Step 9: Profile Selection Screen

  1. The Profile Selection screen will appear.

  2. Enter the desired "Prefix" and "Initial" for your profile.

  3. Click the "Next" button.

Step 10: Status of Profile Saving Screen

  1. The screen will show the status of profile saving.

  2. Verify that the profile is properly saved.

  3. Click the "Next" button.

Step 11: Setup Complete Screen

  1. The "Setup complete" screen will appear.

  2. Check the box to "Launch Network Scanner Tool Lite to Add/Update the Profile/Scanner."

  3. Click the "Finish" button.

Step 12: Activation of Network Scanner Tool Lite

  1. Network Scanner Tool Lite will be activated.

Feel free to follow these steps to install and set up the Network Scanner Tool Lite on your PC.


Recent Posts

See All

Error Codes for the Sharp MX-Copiers

Here is a list of error codes for the Sharp MX-copier, along with brief descriptions and potential causes​​: A0 Series (PCU/SCN-MFP PWB Errors) A0-01, A0-02, A0-04: PCU/SCN-MFP PWB ROM errors. A0-10,


bottom of page